Flanschstärke: 3mm-6mm
Winkeleisenspezifikation: 40 × 40 × 6 T, 45 × 45 × 6 T, 50 × 50 × 6 T
Flanschdurchmesser: ψ400 ~ ψ2000
Flange thickness: 3mm-6mm
Angle iron spec: 40×40×6T;45×45×6T;50×50×6T
Flange diameter: ψ400~ψ2000
Spezifikationen:
1. Formrolle moto: 25HP, Geschwindigkeit kann justiert werden.
2. Umformungswalzenmaterial: SKD11
Härte: HRC60 ℃
4. Formwalzenbasis: S541
5. Umformwalzengetriebe: leistungsstark
6. Einstellbare Vorrichtung zwischen Formrolle
7. Hydrauliksystem
8. Forming Walze kann eingestellt werden, montiert und entladen.
9. Abschnitt, der zum Schneiden verbiegt, kann automatisch oder manuell gewählt werden.
10. Betrieb: Knopf oder Fernbedienung
Decoil: Laden 1200KG, Hydr. Spannung
Schneideklinge:
1. Material: SKD11
2. Härte: HRC60 ℃
3. Obere und untere Klingenbasis sind veränderbar.
4. Klingenbewegung: hyd.
5. Messerbasis und Profilwalze sind zu einem kompletten Satz kombiniert.
6. Formungswalze und Abschnittbieger produzieren Linie.
Controller:
1. Produzieren Controller sind manuelle Art, Auto-Typ und Fernbedienung, alle von ihnen sind mit Notfall-Gerät.
2. Forming Roller Maschine ist NC-Steuerung, TFT-Bildschirm mit Touch-Panel.
3. Hyd. System mit einstellbarer Geschwindigkeit.
Specifications:
1. Forming roller moto: 25HP, speed can be adjusted.
2. Forming roller material: SKD11
3. Hardness: HRC60℃
4. Forming roller base: S541
5. Forming roller transmission: powerful
6. Adjustable device between forming roller
7. Hydraulic system
8. Forming roller can be adjusted, assembled and unloaded.
9. Section bending to cutting can be chosen automatically or manually.
10. Operation: button or remote control
11. Decoil: loading 1200KG, hyd. Tension
Cutting blade:
1. Material: SKD11
2. Hardness: HRC60℃
3. Upper and lower blade base are changeable.
4. Blade movement: hyd.
5. Blade base and section roller is combined to one complete set.
6. Forming roller and section bender are producing line.
Controller:
1. Producing controller are manual type, auto type and remote control, all of them are with emergency device.
2. Forming roller machine is NC control system, TFT screen with touch panel.
3. Hyd. System with adjustable speed.
We will contact with you within 8 hours