Grad: C1020, C1201, C1220, C1100 usw
Breite: 5 mm - 250 mm
Dicke: 1 mm - 70 mm
Grade: C1020, C1201, C1220, C1100, etc.
Width: 5 mm - 250 mm
Thickness: 1 mm - 70 mm
Spezifikationen
von Kupfer Bus Bar / Erde Kupfer Streifen:
1) Grad: C1020,
C1201, C1220, C1100 usw.
2)
normale Größen:
3mm * 25mm *
50m
3mm * 25mm *
15m
6mm * 50mm *
50m
(oder
angepasst wie Ihre Bedürfnisse)
3) Breite: 5 mm - 250 mm
oder benutzerdefinierte
4) Dicke: 1 mm -70 mm oder
benutzerdefinierte
5) Querschnitt bis 7500
mm2
6)
Länge: bis zu 9500 mm (abhängig vom Querschnitt), mit einer
Standard-Längentoleranz von 100 mm
Auf Wunsch
könnte diese Längentoleranz 3 mm betragen
Standardtoleranzen
für Geradheit und Hochkantbogen: 1,5 mm / m
7) Material: Cu-OF /
Cu-ETP
8) Cu-Gehalt: min. 99.90%
9)
Form: trapezförmige Stromschiene (weich), trapezförmige Stromschiene TTY
(Härte),
geformte
Stromschiene (weich), geformte Stromschiene YTY (Härte), usw.
10) Temper:
Halbhart
Merkmale der
Kupferschiene / Erdungskupferstreifen:
1) Reduziert die
Systemkosten
2)
Verbessert die Zuverlässigkeit
3) Erhöht die
Kapazitäten
4)
geringer Kontaktwiderstand
5) Eliminiert
Verdrahtungsfehler
6) Bietet niedrigere
Induktivität
7)
Bietet niedrigere Impedanz
8) Bietet eine dichtere
Verpackung
9) Bietet
eine breite Vielfalt von Verbindungsmethoden
10) Verbessert die thermischen
Eigenschaften
Specifications of Copper Bus Bar / Earth Copper Strip:
1) Grade: C1020, C1201, C1220, C1100, etc.
2) Normal Sizes:
3mm*25mm*50m
3mm*25mm*15m
6mm*50mm*50m
(or customized as your needs)
3) Width: 5 mm - 250 mm or custom
4) Thickness: 1 mm -70 mm or custom
5) Cross section up to 7500 mm2
6) Length: up to 9500 mm (depending the cross section), with a standard length tolerance of 100 mm
Upon demand this length tolerance could be 3 mm
Standard tolerances for straightness and edgewise bow: 1.5 mm/m
7) Material: Cu-OF / Cu-ETP
8) Cu content: min. 99.90%
9) Shape: trapezoidal bus bar (soft), trapezoidal bus bar TTY( hardness),
shaped bus bar (soft), shaped bus bar YTY (hardness), etc.
10) Temper: Semi-hard
1) Reduces System Cost
2) Improves Reliability
3) Increases Capacities
4) Low Contact Resistance
5) Eliminates Wiring Errors
6) Provides Lower Inductance
7) Provides Lower Impedance
8) Provides Denser Packaging
9) Provides Wide Variety of Interconnection Methods
10) Improves Thermal Characteristics
Chemische Zusammensetzung und Sauerstoffgehalt:
Chemical Composition and Oxygen Content:
(Chemische Zusammensetzung%, der Gehalt an Mikroelement ist kleiner oder gleich)
Cu + Ag
(Chemical Composition %, the content of microelement is less than or equal to)
Cu+Ag
Widerstand der Kupferschiene (geformte Kupferschiene):
Resistivity of Copper Bus Bar (Shaped Copper Bus Bar):
Die Oberflächenhärte der Trapezschiene muss HB80-105, weniger als 206 MPa, und die Dehnung darf nicht unter 35% liegen.
Größenbereich: T ≤ 24, H ≤ 150, H / t ≤ 50
The surface hardness of Trapezoidal bus bar shall be HB80—105, less than 206MPa, and elongation shall not below 35%.
Size Scope: T ≤ 24, H ≤ 150, H / t ≤ 50
Größentoleranz (Einheit: mm)
Size Tolerance (Unit: mm)
Einschließlich eines Engels der trapezförmigen Stromschiene muss entsprechend der Probe hergestellt werden. Der Abstand zwischen den beiden Seiten muss der Probe entsprechen und kleiner oder gleich der Größe der Fühlerlehre in der Form sein.
Including angel of trapezoidal bus bar shall be produced according to the sample. The spacing between the two sides shall be same with the sample and below or equal to the size of feeler gauge in the form.
Formtoleranz Wenn die Länge der trapezförmigen Stromschiene weniger als 500 m beträgt, darf ihre Fazies medialis-Tortuosität 2,5 mm nicht überschreiten; während, wenn die Länge weniger als 1 m beträgt, ist ihre Geradheit wie folgt:
a) Wenn a> 2 "und H> 50mm, Geradheit ≤ 2mm
b) Wenn a≤2 "und H≥50mm, Geradheit≤3mm
Shape Tolerance When the length of trapezoidal bus bar is less than 500m, its facies medialis tortuosity shall not exceed 2.5mm; while, when the length is less than 1m, its straightness shall be as follows:
a) When a>2" and H>50mm, straightness≤ 2mm
b) When a≤2" and H≥50mm, straightness≤3mm
Herstellung von Kupferschienen / Erdungskupferstreifen
Manufacturing of Copper Bus Bar / Earth Copper Strip
Shanghai Metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.
1) Shanghai Metal Standard
2) Customization
Anwendungen der kupfernen Stromschiene / Erdkupferstreifen:
1) Erde / Erdung
2) Stromverteilung
3) Stromwandlung
4) Telekommunikation
5) Energiemanagement
6) Stromversorgung
7) Medizinisch
8) Transport
9) Automobilindustrie
Applications of Copper Bus Bar / Earth Copper Strip:
1) Earth / earthing / ground
2) Power distribution
3) Power conversion
4) Telecommunication
5) Energy management
6) Power supply
7) Medical
8) Transportation
9) Automotive industries
We will contact with you within 8 hours